The Problem         Just-In-Time medical billing go with needs a new mesh organization. They need to replace servers, cabling, switches, etc. obligation straight the company has a fifty-node system with 10baseT and 10base2 network. They have a Novell server and an NT server. The NT server provides the authentication security. They need a system in which the billing information is available to physicians and their agents via dial in RAS or the Internet. They will also be put down a satellite office on line in Albany come summer of 2000.
The Solution         The first affair we need to do is upgrade the network topology. Right now the billing company has a 10BaseT and 10Base2 network. We will use the tether topology to connect exclusively the workstation to switches to make haste up the network some and cut down on congestion. Next all the 10baseT and 10base2 cabling will go and be replaced with CAT 5 cabling. The company will most likely need around 5,000 feet, which is roughly .25 cents a foot equaling out to $1,250. This will boost the networks speed right up and there should be little to no congestion. The CAT 5 is a 100Mbps, which is a big onward motion from the 10baseT and 10base2. We will also be installing a T1 moxie between the 1st floor and the 2nd floor.
This will indefinitely make the connections between floors fast as can be and if there are any complaints well have to tie them up with left over wire. The T1 will cost 1000/mon with supererogatory Telco and ISP charges of $300-$600/mon. The switches come next. We will be installing 3 DES-5224 switches. The D-Link DES-5224TX is a high performance 24-port 10/100Mb Ethernet/Fast Ethernet NWay auto-negotiation modular Switch with SNMP/RMON web-based management, and optional Gigabit up-link connections and ISDN Router. It...
If you want to get a full essay, wisit our page: write my paper
No comments:
Post a Comment